Practical examples! The entire application spectrum.
In theory, the machining centres from HERMLE offer impressive performance data. In practice, they are possibly the best machines in the world. They can do so much and can be used for almost any application!
Numerous machining examples are given below. You can either search directly for applications or, alternatively, for the machining spectrums of the individual HERMLE machines. We hope you enjoy discovering the very many interesting details! Experience the full spectrum of applications and a variety of practical examples.
Discover further applications on our YouTube channel.
C 12 | 5-axis technology | Broaching cycle
HERMLE C 12 U dynamic in 5-axis version, machining using HERMLE broaching cycle in 1.4404 for technology development.
C 32 | Model making | Rhinoceros
HERMLE C 32 U dynamic in 5-axis version, machining a rhinoceros in AlMgSi1 for model making, dry machining using Knoll Aerosol Master.
C 32 | Tool and mould making | Pipe die
HERMLE C 32 U dynamic in 5-axis version, machining a pipe die in 1.2343 for tool and mould making, 5-axis radial machining of pipe ducts.
C 42 | Tool and mould making | Thermomix
HERMLE C 42 U dynamic in 5-axis version. Machining a mould insert for a Thermomix in 1.2312 for tool and mould making, process optimisation – full process control using touch probes and HxGN NC-Measure. Best fit alignment over the entire workpiece. Measurement control during the individual machining steps.
C 42 | Aircraft and aerospace industry | Pipe support
HERMLE C 42 U dynamic in 5-axis version, machining a pipe support in AlMg4.5Mn for the aircraft and aerospace industry, production of the outer mould using effective 5-axis roughing. Production of the deep cavities using 5-axis tubing.
C 52 U MT | Sports and leisure industry | Sledge
HERMLE C 52 U MT dynamic in 5-axis mill-turn version. Machining a sledge in AlMg4.5Mn for the sports and leisure industry. Workpiece measurement using Renishaw Sprint touch probe.
C 650 | Model making | Van/T1
HERMLE C 650 in 5-axis version. Machining a van/T1 in AlMg4.5Mn0.7 for model making, scale 1:5. Generation of surface data by scanning an original van T1 built in 1960.
C 12 | Audio & consumer electronics | Headset
HERMLE C 12 U dynamic in 5-axis version, machining a headset in AlMgSi1 for audio + consumer electronics.
C 32 | 5-axis technology | Speedforming
HERMLE C 32 U dynamic in 5-axis version, machining a demo part using speed forming in AlMgSi1, alternative manufacturing process for producing narrow and deep grooves, for example for cooling and stiffening ribs, or vacuum sealing surfaces.
C 42 | Optical industry | Lens carrier
HERMLE C 42 U dynamic in 5-axis version. Machining a lens carrier in copper for the optical industry
C 400 | Model making | Elephant
HERMLE C 400 in 5-axis version. Machining an elephant in AlMgSi1 for model making, workpiece clamping using Lang Makro Grip embossing technology.
C 62 U MT | Vehicle technology | Railway wheel
HERMLE C 62 U MT dynamic in 5-axis mill-turn version. Machining a railway wheel in 1.1730 for vehicle technology. Use of an angle head – simultaneous turning.
C 22 | Fluid engineering | Impeller
HERMLE C 22 U dynamic in 5-axis version, machining an impeller in AlMgSi1 for fluid engineering, production of a capped impeller. Production possible only by using lollipop milling tools.
C 22 | Sports and leisure industry | Propeller
HERMLE C 22 U dynamic in 5-axis version. Machining a propeller in 1.4305 for the sports and leisure industry. Only a sample of the component was available. The geometry data was created by scanning and reverse engineering by Staab Tec.
C 42 | Audio and consumer electronics | Record player
HERMLE C 42 U dynamic in 5-axis version, machining a record player housing in 1.2312 for audio + consumer electronics, workpiece clamping using a hydraulic Stark zero-point clamping system.
C 42 U MT | Vehicle technology | Differential cover
HERMLE C 42 U MT dynamic in 5-axis mill-turn version. Machining a differential cover in 1.4104 for vehicle technology. Simultaneous roughing, finishing and turning. Milling process using Heidenhain OCM cycles.
C 42 U MT | Aircraft and aerospace industry | Skiving/fir tree
HERMLE C 42 U MT dynamic in 5-axis mill-turn version. Machining a milled/turned part using skiving and fir-tree cutters in 1.1730 for the aircraft and aerospace industry
C 32 | Production technology | Power stage
HERMLE C 32 U dynamic in 5-axis version, machining a power stage in 1.2312 for production technology process optimisation – full process control using laser scanning and HxGN NC-Measure. Fast alignment of the workpiece, measurement monitoring of blanks and recording of surface data for further processing in CAM.
